Bussmann NON-225 225 Amp One-Time Blade Fuse Non-Current Limiting Class H, 250V UL Listed

Home > Electrical >

List Price: $52.95

Our Price: $24.95

Savings: $28.00

Quantity in Stock:1

Availability: Usually Ships in 1 to 2 Business Days
Product Code: NON-225

Qty:

Description

Bussmann NON-225 225 Amp, One-time general purpose non-current limiting fuse used in lighting circuits, main panel protection, and other circuits that don't contain large electric motors or inductive loads. One to 60 amp fuses UL Listed Class K5 (IR: 50kA). 70 to 600 amp fuses UL Class H (IR: 10kA). Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. They are available in a wide variety of sizes, amp and volt ratings up to 600Vac and 600 amps. Cartridge fuses are used extensively in commercial, industrial and agricultural applications as well as residential fuse panels, air conditioning, pumps, appliances and other equipment. Cartridge fuses are available in two types. General Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Heavy- Duty fuses have a time-delay feature, allowing momentary motor startups. Both are available in 250Vac and 600Vac versions with catalog symbol and amp rating stamped on the knife blade or end cap, One-Time Class K Fuses Style: One-Time Amperage Rating: 150 Voltage (AC): 250 Class: H Length: 7-1/8 Diameter: 1-9/16.

Features

For general purpose circuits, size at ampere rating of circuit.
For motor circuits, size at 300% to 400%.
ONE-TIME fuses do not have a time delay feature and thus should not be specified in circuits where large transients or motor overloads occur.
Protect lighting, heating, and other circuits not subject to temporary surges and where available short-circuit currents are relatively low.
UL Listed - 250Vac: Class H (65-600A), Std. 248-6.

Share your knowledge of this product. Be the first to write a review »

COMPANY

ACCOUNT

SHOPPING